Heat Press Nation SubliCraft SubliCraft 16 oz Skinny Tumbler (6.1 in tall) template size
The print area of the Heat Press Nation SubliCraft SubliCraft 16 oz Skinny Tumbler (6.1 in tall) is straight (a plain rectangle). Here are its measurements, a free true-size template, and a one-click way to warp your design for it.
| Print area | Top circumference | Bottom circumference | Height |
|---|---|---|---|
| Whole wrap | 9.33 in (237 mm) | 9.33 in (237 mm) | 5.9 in (150 mm) |
From the published source below; not yet confirmed by TaperWrap users.
Open this cup in TaperWrap Download blank SVG
Note: The imprint height is almost the full body height.
Flat template: 9.33 × 5.9 in (237 × 150 mm), without seam overlap.
Check your own cup
Cups sold under the same name can differ by a few millimetres, and that shows up as a gap at the seam. Measure the top and bottom circumference of the print area with a soft tape and compare (how to measure).
Measured yours? Open it in TaperWrap and download your wrap; afterwards TaperWrap asks whether these numbers fit your cup. Confirmations and corrections from crafters keep this page accurate. Only the numbers are shared, never your design.
Sources
- heatpressnation.com (supplier product page: Size: 6.1" H x 2.9" Diameter / Imprint Area: 5.9 " H x 9.33" W)
Similar blanks
- 20 oz skinny straight tumbler (common template)
- MakerFlo 20 oz skinny straight tumbler
- Conde LumaSteel Stainless Steel Skinny Tumbler 20oz (TUM217 white / TUM218 clear gloss)
- Conde LumaSteel Sippy Cup 13oz SSCUP13S
- Conde LumaSteel Stainless Steel Sublimation Water Bottle 32oz WB014
- Conde DyeTrans Ceramic Shot Glass 3oz SHOT04
See every cup in the Blank Registry.