Polar Camel 12oz Vacuum Insulated Water Bottle (SWB912/SWB913; laser LWB051...) template size
The print area of the Polar Camel 12oz Vacuum Insulated Water Bottle (SWB912/SWB913; laser LWB051...) is straight (a plain rectangle). Here are its measurements, a free true-size template, and a one-click way to warp your design for it.
| Print area | Top circumference | Bottom circumference | Height |
|---|---|---|---|
| Whole wrap | 9.375 in (238 mm) | 9.375 in (238 mm) | 2.75 in (70 mm) |
From the published source below; not yet confirmed by TaperWrap users.
Open this cup in TaperWrap Download blank SVG
Note: 9.375 is more than pi x 2.875 = 9.03, so it likely includes overlap. The band position is not published.
Flat template: 9.38 × 2.75 in (238 × 70 mm), without seam overlap.
Check your own cup
Cups sold under the same name can differ by a few millimetres, and that shows up as a gap at the seam. Measure the top and bottom circumference of the print area with a soft tape and compare (how to measure).
Measured yours? Open it in TaperWrap and download your wrap; afterwards TaperWrap asks whether these numbers fit your cup. Confirmations and corrections from crafters keep this page accurate. Only the numbers are shared, never your design.
Sources
- conde.com (supplier product page: Overall Size: 2 7/8" W x 6 3/4" H (with lid) / Height Without Lid: 5 5/8" H / Bottom Dimensions: 2 7/8" diameter / Personalization Area: 2 3/4" H x 9 3/8" circumference)
Similar blanks
- 20 oz skinny straight tumbler (common template)
- MakerFlo 20 oz skinny straight tumbler
- Conde LumaSteel Stainless Steel Skinny Tumbler 20oz (TUM217 white / TUM218 clear gloss)
- Conde LumaSteel Sippy Cup 13oz SSCUP13S
- Conde LumaSteel Stainless Steel Sublimation Water Bottle 32oz WB014
- Conde DyeTrans Ceramic Shot Glass 3oz SHOT04
See every cup in the Blank Registry.