20 oz skinny tapered tumbler (larger size) template size
The print area of the 20 oz skinny tapered tumbler (larger size) is tapered (a curved wrap). Here are its measurements, a free true-size template, and a one-click way to warp your design for it.
| Print area | Top circumference | Bottom circumference | Height |
|---|---|---|---|
| Whole wrap | 9.3 in (236 mm) | 8.5 in (216 mm) | 8.125 in (206 mm) |
From the published source below; not yet confirmed by TaperWrap users.
Open this cup in TaperWrap Download blank SVG
Flat template: 9.3 × 8.23 in (236 × 209 mm), without seam overlap.
Check your own cup
Cups sold under the same name can differ by a few millimetres, and that shows up as a gap at the seam. Measure the top and bottom circumference of the print area with a soft tape and compare (how to measure).
Measured yours? Open it in TaperWrap and download your wrap; afterwards TaperWrap asks whether these numbers fit your cup. Confirmations and corrections from crafters keep this page accurate. Only the numbers are shared, never your design.
Sources
- quickspi.com (third-party template: size 2)
Similar blanks
See every cup in the Blank Registry.