MakerFlo 40 oz tumbler with handle (Stanley-style) template size
The print area of the MakerFlo 40 oz tumbler with handle (Stanley-style) is printed in 2 sections. Here are its measurements, a free true-size template, and a one-click way to warp your design for it.
| Section | Top circumference | Bottom circumference | Height |
|---|---|---|---|
| Section 1 (top) | 12.75 in (324 mm) | 12.75 in (324 mm) | 5.75 in (146 mm) |
| Section 2 | 10.3 in (262 mm) | 10.3 in (262 mm) | 3.58 in (91 mm) |
From the published source below; not yet confirmed by TaperWrap users.
Open this cup in TaperWrap Download blank SVG
Flat template: 12.75 × 9.53 in (324 × 242 mm), both pieces stacked, without seam overlap.
The plain band between the sections isn't published. Measure it on your cup and enter it in TaperWrap under Section 2 so your design lines up across both pieces.
Check your own cup
Cups sold under the same name can differ by a few millimetres, and that shows up as a gap at the seam. Measure the top and bottom circumference of the print area with a soft tape and compare (how to measure).
Measured yours? Open it in TaperWrap and download your wrap; afterwards TaperWrap asks whether these numbers fit your cup. Confirmations and corrections from crafters keep this page accurate. Only the numbers are shared, never your design.
Sources
- makerflo.com (supplier product page: flat section templates 12.75 × 5.75 in and 10.30 × 3.58 in (its templates page says 12.9 × 5.75 and 10.3 × 3.6); the band between them is not published)
Similar blanks
See every cup in the Blank Registry.