Polar Camel Standard Can Beverage Holder template size
The print area of the Polar Camel Standard Can Beverage Holder is straight (a plain rectangle). Here are its measurements, a free true-size template, and a one-click way to warp your design for it.
| Print area | Top circumference | Bottom circumference | Height |
|---|---|---|---|
| Whole wrap | 10 in (254 mm) | 10 in (254 mm) | 2.5 in (64 mm) |
From the published source below; not yet confirmed by TaperWrap users.
Open this cup in TaperWrap Download blank SVG
Note: Laser-engraving listing.
Flat template: 10 × 2.5 in (254 × 64 mm), without seam overlap.
Check your own cup
Cups sold under the same name can differ by a few millimetres, and that shows up as a gap at the seam. Measure the top and bottom circumference of the print area with a soft tape and compare (how to measure).
Measured yours? Open it in TaperWrap and download your wrap; afterwards TaperWrap asks whether these numbers fit your cup. Confirmations and corrections from crafters keep this page accurate. Only the numbers are shared, never your design.
Sources
- conde.com (supplier product page: Overall Size: 3 1/8" W x 5 1/4" H / Top Opening: 2 5/8" W / Bottom Dimensions: 3 1/8" diameter / Personalization Area: 2 1/2" H x 10" circumference)
Similar blanks
- Polar Camel Slim Can Beverage Holder
- Heat Press Nation SubliCraft SubliCraft Stainless Steel Can Cooler for Skinny 12 oz Cans
- Heat Press Nation SubliCraft SubliCraft Stainless Steel Can Cooler for Standard 12 oz Cans
- HTVRONT Sublimation Clear/Frosted Glass Can with Bamboo Lid 16oz
- MakerFlo 12oz Slim Duozie can cooler
- JPPlus 12oz Skinny Can Cooler (SSCK)
See every cup in the Blank Registry.